Oct 26, 2020 • Filed to: Answer Hard Drive Problems • Proven solutions
While the external hard drive connected to the Windows computer or Mac, and the device did not show up. How to fix external hard drive not recognized? Don't worry, in this guide we will show you the best solution to fix the hard drive not recognized problem.
This problem will cause by some partition issues: the external hard drive partition got damaged, the file system got crashed, the drive errors in Windows computer, or the dead USB ports. You can try the hard drive on another computer or connect it with other USB ports. If it does not get working, you can follow the next solution to fix the external hard drive not recognized on Windows computer and Mac, and you can recover lost data from external hard drive with Recoverit Data Recovery.
I renamed my flash drive. From that point on I could not access the drive from Finder. The name didn't show up in the lefthand column. When I removed the flash drive I received the usual warning about ejecting properly. So, the Mac knew about the drive. I did a search in 'all my files' for a filename I knew existed on the flash drive. How to Fix External Hard Drive Not Recognized on Windows. In windows, this problem can be because of partition issues, dead USB ports, driver windows conflicts, file systems, dead or outdated drivers.
In windows, this problem can be because of partition issues, dead USB ports, driver windows conflicts, file systems, dead or outdated drivers. Here are the steps you can follow to fix this issue in case of USB flash or external hard drives: https://bestyup728.weebly.com/insaniquarium-mac-download.html.
Step 1You might be plugging in the USB cable in a dead USB port. Unplug your external hard drive and plugin it in some other USB ports. Now, see if it is present there in the My Computer window. If not, follow step 2.
Step 2Now, look for the external drive in the Disk Management Window. For this, click Start and then click Run or press windows key + r, press enter after typing diskmgmt.msc in the Run dialog. This will open the Disk Management Window. Now, look for the external disk in this window. In this window, you can find your drive even if it is not recognized because of no partition. If you cannot find the drive in the Disk Management window then you can go for step four.
Step 3If it is not recognized by plugging in some other port or it is not visible in the Disk Management Window, then there might be some issue with the external drive. Check it on some other computers. Now, follow step 1 to step 3 in that computer in case the external drive is not recognized. If the problem exists with another computer also then something is wrong with the drive, otherwise follow step 5:
Step 4If it is working in some other systems but not in yours, Windows is having some problem with the drivers. To diagnose a driver problem, open the run dialog by pressing Windows + r and type 'devmgmt.msc'? Now press enter. Expand Disk Drives and look for a device having a yellow exclamation mark. This yellow exclamation mark indicates a problematic driver. Now, right-click on that device and read the error message after selecting properties. This issue can resolve in the following two ways:
Now, plug in the external drive again or follow step 6 if the drive is still not recognized.
Step 5Problem in partitioning and formatting can also be a cause of this issue. Partitioning and file system issues can be fixed by using Windows Disk Management tools. To create a new partition, right-click inside the unallocated space and select New Simple Volume. You can create a new partition by following onscreen instructions. Sometimes, your drive is formatted with the ext4 file system of Linux, NTFS file system, HFS Plus file system, or FAT32 file system which is not recognized by your Windows. Reformatting of the drive can resolve this issue. For this, right-click on the partition, select format, and then select the file system. Here, it is important to know that all files in the drive will be deleted. Therefore, copy your files in some other systems before proceeding.
Like Windows, Mac also detects an external drive automatically. If it doesn't, follow these steps:
Step 1 First of all, look for the external hard drive in the finder window. Nox app player mac pubg. For this, click on File and then click New Finder Window. Now, look for the drive below the remote disk.
Step 2 If the external drive is not there, make sure that the USB cable is properly plugged in the external hard drive and the port.
Step 3 Sometimes, the drive is connected but not mounted. To mount a drive, open Disk Utility and look for the drive in the list. If it is there, check below it. Now click on the mounting button to mount it. Open a Finder window to see if the drive is mounted or not.
Step 4 If you still cannot find it in the finder, it might not be getting enough power. Single USB ports can provide only 5 V. In that case, make use of USB cable having one USB connection for the external HD and two for Mac. This will supply the power required by the external hard drive.
These steps for fixing an external hard drive not recognized on Windows and Mac are suitable for external hard drives of all capacities and manufacturers. However, if still the issue is not resolved, you can avail of professional help.
While the external hard drive got damaged and did not detect on the computer, after you fix the problem, you should your data back. We will introduce the best external hard drive data recovery to help you retrieve data back. Recoverit Data Recovery Software is a powerful data recovery program, it can help you recover data from external hard drives easily and effectively.
Recoverit Data Recovery is the best external hard drive recovery program, it can easily and effectively help you recover lost or accidentally deleted files from the hard disk drive, or another external storage device: USB drive, flash drive, SD card.
Download and install Recoverit Data Recovery on your computer. Launch Recoverit Data Recovery and follow the next steps to perform external hard drive data recovery on a Windows computer, if you are a Mac user, you can download Recoverit Data Recovery for Mac to go on.
Step 1. Connect your external hard drive to the computer, select it while the disk detected on the program.
Step 2. The external hard drive recovery software will start scanning the device to searching the lost files.
Step 3. In minutesï¼ all recovered files will display on the result. You can preview photos, videos, music, Word, Excel, PPT, and PDF. Select your files and click the 'Recover' button to restore.
When the external hard drive got damaged, you can try to fix it with the solution mentioned above. Also, get your data back with Recoverit Data Recovery in simple steps. Download and try it for now.
Flash drive flashing red but not working is one of the commonest issues related to USB drives. The possible causes and workable solutions vary according to your specific situation. If your flash drive is detected but inaccessible, don't hesitate to use EaseUS Data Recovery Wizard to retrieve your files immediately. If it is blinking but not detected, don't worry. There are potential fixes provided below.
If your flash drive is blinking but not readable or inaccessible on your computer, stay here. By following the provided tips, you will make it work again without losing any data:
| Workable Solutions | Step-by-step Troubleshooting |
|---|---|
| Flash Drive Flashing & Inaccessible | 1. Recover data from inaccessible flash drive; 2.Repartition or format the flash drive.Full steps |
| Flash Drive Blink & Unrecognizable | 1. Check USB collection; 2. Update device driver in Device Manager; 3. Send for manual repair.Full steps |
'I have a 64GB Lexar USB flash drive which has data on it. It appears functioning abnormally because after putting it in the computer, the light is flashing and blinking red. I'm not sure if the red light is the problem, but I can't access the drive due to an error saying 'G:/ is not accessible. The file or directory is corrupted and unreadable.'
Some flash drives, like Lexar flash drives, are equipped with an LED light that indicates the status of your device. Whether your flash drive light flashes or how it flashes always imply some information about your device.
Depending on the manufacturer or model, the tiny beam of light coming from a specific type of flash drive varies, it can be red, blue, green or orange, which conveys messages of data transfer, data reading or writing. Following are some examples that are supposed to help you determine whether your flash drive blinking red is normal or not.
√ YES
× NO
Bonjour hot chocolate maker instruction manual. If you can't determine whether your flash drive is dead, you can follow the next part to check and repair your device.
Both a flash drive detected but inaccessible and flash drive not detected are symptoms of a flash drive not working. But the solutions to these situations vary. Thus, before you fix your device, you need to check whether your USB flash drive is recognized in Disk Management:
Step 1. Keep your USB flash drive connected.
Step 2. Right-click 'This PC' and choose 'Manage'.
Step 3. Go to 'Disk Management'. Then you will find your device in one of the following situations:
If your flash drive can still be recognized by your computer but inaccessible, congratulations, you have a high chance to bring your device back to normal. If your device shows unallocated or RAW, recover data from your device and then partition or format your flash drive following the details below. If you see your USB flash drive showing 'No Media' or 'Not Initialized', go to the related article to learn how to cope with it.
Mostly, if the USB flash drive will blinking as red on your computer, it will become inaccessible on your computer.
In this case, your USB flash drive or other storage devices will also display as RAW or unallocated space in Disk Management. Given that, you need hard drive recovery software - EaseUS Data Recovery Wizard for help.
It allows you to retrieve the files stored on your blinking red flash drive easily in only 3 steps:
Step 1. Choose the flash drive to scan.
Launch EaseUS Data Recovery Wizard and choose your flash drive where you lost important files. Click 'Scan' to start.
Step 2. Check and preview found flash drive data.
After a quick and advance scan, you can quickly locate a specific type of file by using the Filter feature as well as the Search.
Step 3. Restore flash drive data.
After checking and finding lost flash drive files, select them and click Recover to restore. You shall save the found files to a safe location on your PC rather than to your flash drive.
With data safely recovered to another location, you can start partitioning or formatting the flash drive in your preferred way which usually fixes the corruption problem and brings it back to life.
If your blinking flash drive shows as unallocated space, you will need to partition the device after the data recovery process in order to prepare it for data storage. While if your device has a RAW file system, you will need to format the USB flash drive to make it usable again.
The USB flash drive blinking but not detected can either result from minor connection issue or serious hardware failure of your device. If you don't know what the cause is, follow the tips below one by one to fix your problematic flash drive.
There are two ways you can apply to check your flash drive connection, including:
An outdated device driver is also likely to be the reason why your USB flash drive is blinking red but not working. Therefore, updating your device driver is also a solution worth trying.
Step 1. Connect the USB flash drive to PC, right-click on 'This PC' (in Windows 10) and choose 'Properties'.
Step 2. Click 'Device Manager' then expand “Disk drives”. Find and right-click the problematic USB drive and select 'Update driver'
Step 3. Click 'automatically search for driver software online'.
Step 4. Wait for the driver to be updated, then reboot your computer. Afterward, you can try to reconnect your USB flash drive to PC and check whether the USB drive shows up or not.
If your USB flash drive remained unresponded to the fixes above, I'm afraid there are physical corruptions on your device. In such a case, sending your device for manual repair is recommended. Is your device still under warranty? If so, you can get it replaced.
For more possible fixes, you can refer to the article about Seagate external hard drive light blinking but not working or the one about USB flash drive not showing up.
What can cause a flash drive light blinking but not working? The possible causes could be many, i.e. file system error, I/O device error, connection issue, or hardware failure. This should remind you of two things: grow a good habit of using a USB flash drive and make a backup of your important files somewhere else.
0 
Star